User Manual Q&AAnswer
Dec 21, 2024 - 09:57 PM
Cleaning the Jpord QFUS22035-SB1 diffuser regularly is essential to maintain its performance and prevent any residue buildup. Here is a step-by-step guide on how to clean the diffuser:
1. Unplug the diffuser: Before cleaning, make sure to unplug the power adapter from the diffuser and disconnect it from the electrical outlet.
2. Empty the water tank: Carefully pour out any remaining water from the water tank. Be cautious not to spill water on the electronic components.
3. Wipe the water tank: Use a soft cloth or sponge dampened with clean water to wipe the inside and outside of the water tank. Avoid using harsh chemicals or detergents as they may damage the diffuser.
4. Clean the ultrasonic plate: Gently wipe the ultrasonic plate located at the bottom of the water tank with a soft cloth or cotton swab. This helps remove any oil or residue buildup that may affect the diffuser's performance.
5. Rinse the water tank: Rinse the water tank thoroughly with clean water to remove any remaining residue or cleaning solution.
6. Dry the diffuser: Allow the water tank and other components to air dry completely before reassembling the diffuser. Make sure there is no moisture left before using it again.
7. Reassemble and refill: Once the diffuser is completely dry, reassemble the water tank and refill it with clean, room-temperature water. Add your desired amount of essential oils to the water if desired.
By following these cleaning steps regularly, you can ensure that your Jpord QFUS22035-SB1 diffuser remains in optimal condition and provides you with long-lasting aromatic experiences. For more detailed instructions or troubleshooting, please refer to the user manual provided with the product.
Add New Comment