User Manual Q&AAnswer
Dec 21, 2024 - 09:31 PM
Calibrating the Molo DT-1 LED Magnifying Glasses is a simple process. Here are the step-by-step instructions:
1. Before calibrating, ensure that the magnifying glasses are turned off.
2. Hold the magnifying glasses by the handle to avoid touching the lens.
3. Locate the calibration xxxx or button on the magnifying glasses. It is usually located near the LED light or on the side of the device.
4. Turn on the magnifying glasses by pressing the power switch or button.
5. Place the tip of the calibration xxxx or button on a clean, flat surface. This surface should be free from any gems or metals.
6. Gently press the calibration xxxx or button against the surface and hold it for a few seconds.
7. Release the calibration xxxx or button and wait for the magnifying glasses to complete the calibration process. This may take a few seconds.
8. Once the calibration is complete, the magnifying glasses are ready to use. You can now test gems, diamonds, or other small items with accuracy.
Note: It is important to calibrate the magnifying glasses before each use to ensure accurate results. If you encounter any issues during the calibration process or have further questions, refer to the user manual provided with the product or contact Molo customer service for assistance.
Add New Comment