User Manual Q&AAnswer
Dec 21, 2024 - 05:53 AM
To change the batteries in the EasyLifeCare ELC-M110LN LED Magnifying Glass, please follow these steps:
1. Locate the battery compartment on the LED light unit. It is usually located at the end of the magnifying glass opposite the lens.
2. Open the battery compartment by sliding or lifting the cover. Some models may have a small latch that needs to be released.
3. Remove the old batteries from the compartment. Take note of their orientation to ensure proper installation of the new batteries.
4. Insert the new CR2016 lithium button cell batteries into the compartment, following the correct polarity (+/-) indicated inside the compartment. Make sure the batteries are securely in place.
5. Close the battery compartment by sliding or securing the cover back into place. Ensure that it is properly sealed to prevent any moisture or debris from entering.
6. Test the LED lights by turning them on. If the lights do not turn on, double-check the battery installation and make sure the batteries are fully charged.
Note: It is recommended to use CR2016 lithium button cell batteries for optimal performance. These batteries are commonly available at electronics stores or online retailers.
If you encounter any difficulties or have further questions, please refer to the EasyLifeCare ELC-M110LN LED Magnifying Glass user manual for additional guidance.
Add New Comment