User Manual Q&AAnswer
Dec 21, 2024 - 05:36 AM
To replace the batteries in the EASY MAGNIFIER PM1 LED Magnifying Glass, follow these steps:
1. Open the battery box: Locate the battery box on the handle of the magnifying glass. It should have a small compartment that can be opened.
2. Remove the old batteries: Carefully remove the old batteries from the battery box. Take note of their orientation so you can insert the new batteries correctly.
3. Insert the new batteries: Take two CR1220 lithium batteries and insert them into the battery box, making sure they are placed in the correct orientation. The positive (+) and negative (-) symbols on the batteries should align with the markings inside the battery box.
4. Close the battery container: Once the new batteries are inserted, securely close the battery container to ensure a tight fit.
5. Test the LED light: To confirm that the new batteries are working, remove the lens of the magnifying glass and make sure the LED light turns on automatically. This indicates that the batteries are properly installed and functioning.
Note: It is recommended to check the battery level regularly and replace the batteries when they are low to maintain optimal performance of the LED light.
For more detailed instructions and illustrations, please refer to the "Setup Guide" section of the EASY MAGNIFIER PM1 LED Magnifying Glass User Manual.
Add New Comment