User Manual Q&AAnswer
Dec 21, 2024 - 05:24 AM
To change the projection mode on the Learning Resources LER2830 Stars Projector, follow these steps:
1. Make sure the projector is turned on and a disc is inserted.
2. Locate the side switch on the projector. It should be labeled with icons representing the different projection modes.
3. Slide the switch to the desired mode. For static stars, position the switch to the icon depicting static stars. For rotating stars, position the switch to the icon depicting rotating stars. For constellation patterns, position the switch to the icon depicting constellations.
4. Once you have selected the desired mode, the projector will start projecting the corresponding images.
Note: The projection mode can only be changed when the projector is turned on and a disc is inserted. Make sure to adjust the focus using the yellow lens at the front of the projector for clear images in each projection mode.
If you are still experiencing difficulties changing the projection mode, refer to the user guide for further troubleshooting steps or contact Learning Resources customer support for assistance.
Add New Comment