User Manual Q&AAnswer
Dec 21, 2024 - 05:23 AM
To charge the ELITRA HOME 3-in-1 Electric Bottle Opener, follow these steps:
1. Connect the included USB charging cable to the charging port located on the opener. The charging port is typically located on the bottom or side of the opener.
2. Plug the other end of the USB cable into a power source, such as a computer USB port or a USB wall adapter.
3. The LED indicator light on the opener will illuminate to indicate that it is charging. The LED light may flash or change color to indicate the charging progress.
4. Allow the opener to charge until the LED indicator light shows a full charge. This may take a few hours, depending on the battery level.
5. Once fully charged, disconnect the USB cable from the opener and the power source.
Note: It is recommended to fully charge the opener before the first use and to regularly recharge it to prolong battery life. If the LED indicator light does not illuminate or if you encounter any issues with charging, ensure that the USB cable is securely connected and try using a different USB charging cable or adapter.
For more information on charging and battery maintenance, refer to the "Care and Maintenance" section in the ELITRA HOME 3-in-1 Electric Bottle Opener User Manual.
Add New Comment