User Manual Q&AAnswer
Dec 21, 2024 - 05:18 AM
To change the temperature on the BOSWELL BS778 Hot Glue Gun, please follow these steps:
1. Make sure the glue gun is plugged into a power outlet and turned on.
2. Locate the temperature control dial or button on the glue gun. It is usually located near the handle or on the body of the gun.
3. Depending on the model, you may need to rotate the temperature control dial or press the temperature control button to adjust the temperature.
4. Refer to the temperature range provided in the user manual (284 - 428℉ or 140 - 220℃) to select the desired temperature for your specific material or project.
5. Once you have set the desired temperature, wait for the glue gun to reach the new temperature. This may take a few minutes.
6. Check the warning light on the glue gun to ensure that it indicates the glue gun is fully heated and ready to use at the new temperature.
7. Test the glue flow by squeezing the trigger. If the glue is not flowing smoothly or the temperature needs further adjustment, repeat the steps above to fine-tune the temperature setting.
Note: It is important to handle the glue gun with caution when adjusting the temperature, as the nozzle and other parts may become hot during operation. Always refer to the user manual for specific instructions and safety guidelines.
For more detailed instructions and safety information, please refer to the BOSWELL BS778 Hot Glue Gun User Manual.
Add New Comment