User Manual Q&AAnswer
Dec 21, 2024 - 04:17 AM
To change the batteries in the SURENSHY LED Magnifying Glass, please follow these steps:
1. Make sure the magnifying glass is turned off and remove any USB cable connected to it.
2. Locate the battery compartment on the handle of the magnifying glass. It is usually located towards the bottom end of the handle.
3. Use your fingers or a small screwdriver to gently slide open the battery compartment cover.
4. Insert three AAA batteries into the compartment, making sure to align the positive (+) and negative (-) ends of the batteries correctly with the markings inside the compartment.
5. Close the battery compartment cover securely by sliding it back into place until it clicks or locks.
6. Turn on the magnifying glass to check if the new batteries are working properly.
Please note that the SURENSHY LED Magnifying Glass does not come with batteries included, so you will need to purchase three AAA batteries separately. Make sure to use fresh batteries for optimal performance.
For more detailed instructions, including visual illustrations, you can refer to the "Setup Guide" section of the SURENSHY LED Magnifying Glass Instruction Manual provided above.
Add New Comment