User Manual Q&AAnswer
Dec 21, 2024 - 04:03 AM
To adjust the brightness of the ZTree LED Magnifying Glass, follow these steps:
1. Make sure the magnifying glass is connected to a working wall plug and turned on.
2. Locate the button switch on the lamp base or control panel.
3. Press and hold the button switch for a few seconds until the LED lights start to dim.
4. Release the button switch when the desired brightness level is reached.
5. If you want to further adjust the brightness, press the button switch again to cycle through the different brightness levels.
6. Keep pressing the button switch until you find the desired brightness level.
7. Release the button switch when you have reached the desired brightness level.
Note: The has 10-level stepless dimming, allowing you to adjust the brightness from 10% to 100% according to your needs. If you are still experiencing issues with adjusting the brightness, refer to the user manual for troubleshooting tips or contact ZTree's customer service for further assistance.
Add New Comment