User Manual Q&AAnswer
Dec 21, 2024 - 03:57 AM
To turn on the LED lights on the Vision Aid 21LEDVisionAid LED Magnifying Glass, please follow these steps:
1. Locate the power switch: The power switch is usually located on the handle of the magnifying glass.
2. Flip the power switch: Once you have located the power switch, flip it to the "on" position. This will activate the LED lights.
3. Check battery orientation: Before turning on the LED lights, make sure the batteries are inserted correctly. Ensure that the positive (+) and negative (-) ends of the batteries align with the markings inside the battery compartment.
4. Adjust light brightness (if needed): Some models may have adjustable brightness settings for the LED lights. If your magnifying glass has this feature, you can adjust the brightness according to your preference.
Please note that the Vision Aid 21LEDVisionAid LED Magnifying Glass requires three AAA batteries (not included) to power the LED lights. Make sure to insert fresh batteries if the lights do not turn on or appear dim.
For more detailed instructions and information, please refer to the "Setup Guide" section of the user manual provided with your magnifying glass.
Add New Comment