User Manual Q&AAnswer
Dec 21, 2024 - 03:29 AM
To change the color mode on the TOMSOO MG-04 LED Magnifying Glass, follow these steps:
1. Locate the button on the gooseneck of the magnifying glass. This button is used to control the color modes and brightness.
2. Press the button once to turn on the LED lights. The default color mode will be activated.
3. To switch between the five color modes, press the button repeatedly. Each press will cycle through the available color modes.
4. Keep pressing the button until you find the desired color mode. The magnifying glass offers a range of color options, from cool white to warm yellow, allowing you to customize the lighting to meet your specific needs.
5. Once you have selected the desired color mode, release the button. The magnifying glass will maintain the chosen color mode until you change it again.
Note: The TOMSOO MG-04 LED Magnifying Glass also features stepless dimming, which allows you to adjust the brightness level. To adjust the brightness, press and hold the button on the gooseneck. The brightness will gradually increase or decrease, depending on how long you hold the button. Release the button when you reach the desired brightness level.
For more information and visual instructions, please refer to the "Setup Guide" section of the TOMSOO MG-04 LED Magnifying Glass user manual.
Add New Comment