User Manual Q&AAnswer
Dec 21, 2024 - 03:25 AM
To change the magnification level on the Ebbnivs 608B LED Magnifying Glass, follow these steps:
1. Start by turning on the LED lights. Slide the ON/OFF switch to the ON position.
2. Look for the built-in 1-inch holes on the magnifying glass. These holes are used to change the magnification level.
3. The default magnification level is 10X. If you wish to increase the magnification, insert the object you want to magnify into the 20X or 45X hole.
4. Gently place the object into the desired hole, ensuring it is positioned correctly.
5. Adjust the viewing distance accordingly. For the 45X lens, keep the object distance within 3 cm for a straight image. If the object distance is greater than 3 cm, the image will flip.
6. Once the object is in place and the viewing distance is adjusted, look through the magnifying glass to see the magnified image.
Note: The Ebbnivs 608B LED Magnifying Glass offers three levels of magnification: 10X, 20X, and 45X. By inserting the object into the corresponding hole, you can achieve the desired magnification level.
Add New Comment