User Manual Q&AAnswer
Dec 21, 2024 - 02:37 AM
To change the glue sticks in the Bukicho 20W Hot Glue Gun, please follow these steps:
1. Make sure the glue gun is unplugged and cool to the touch before proceeding.
2. Locate the back feed of the glue gun. This is where the glue sticks are inserted.
3. Push the used glue stick forward, towards the nozzle, until it is fully removed from the back feed.
4. Take a new glue stick and insert it into the back feed, pushing it all the way in until it is secure.
5. Repeat this process if you need to change multiple glue sticks.
6. Once the new glue stick is inserted, plug in the glue gun and turn it on.
7. Allow the glue gun to heat up for 1.5 to 3 minutes, or until the glue stick has melted and is ready to dispense.
8. Test the glue flow by squeezing the trigger. If the glue is flowing smoothly, you are ready to use the glue gun with the new glue stick.
Note: It is important to use glue sticks that are compatible with the Bukicho 20W Hot Glue Gun. Using the wrong size or type of glue stick may result in poor performance or damage to the glue gun.
Add New Comment