User Manual Q&AAnswer
Dec 21, 2024 - 02:34 AM
To set up the WAQONUY 4x-cup Tumbler Spinner, follow these steps:
1. Take the machine out of the box and carefully remove all of its parts.
2. Install the motor by following the directions to connect it to the base.
3. Attach the spinning arms securely to the motor.
4. Insert foam pieces into the holders that are the right size for your cups.
5. Place the included silicone pad on your work surface to catch any resin or glitter.
6. Find a suitable power outlet and plug in the 6.3-foot power cord.
7. Test each spinning arm by turning on the separate switches.
8. Set the direction of movement to either clockwise or counterclockwise as needed.
9. Set up the drying racks in a convenient location for drying your cups.
10. Run the machine for a short time to check for any unusual noise.
11. Adjust the positions of the foam pieces to ensure they hold the cups firmly.
12. Make sure the spinning speed (4-5 RPM) is steady and smooth.
13. Use the included silicone brush to spread resin evenly on the spinning cups.
14. Check that the cooling holes are working to prevent overheating.
15. Refer to the manual for any additional instructions or troubleshooting tips.
Please consult the WAQONUY 4x-cup Tumbler Spinner User Manual for more detailed information and illustrations on the setup process.
Add New Comment