User Manual Q&AAnswer
Dec 21, 2024 - 02:32 AM
Sure! Here are the step-by-step instructions for assembling the Caramote cne1 Cup Spinner Machine:
1. Open the Machine's box: Take everything out of the package and arrange it so that it's easy to get to.
2. Assemble the Frame: Use the fixing screws that came with the frame to connect the steel frame parts.
3. Put the arms on: Link the arms that are spinning to the motor's device for turning.
4. Put in Foam Inserts: Pick out the right foam inserts for your cup size and attach them to the arms.
5. Connect Power line: Plug the 66.9-inch power line into a port that works with it.
6. Adjust the Arm Positions: Put the arms and foam inserts in place so that they firmly fit your cup size.
7. Try movement Direction: To make sure everything works right, use the switches to try movement both clockwise and counterclockwise.
8. Check Motor Function: Make sure the motor works well and doesn't make too much noise or shaking.
9. Secure Parts: Make sure all the parts are firmly in place by tightening any screws or fittings that are loose.
10. Test the Safety Switches: Make sure that each safety switch works properly to control the right arm.
11. Set Up Work Area: Arrange your desk so that the spinning cup and power source are easy to reach.
12. Get your cup ready: Clean the cup and get it ready to use epoxy glue.
13. Start Spinning: To make sure the turning is even, turn on the motor and watch the cup spin.
14. As Needed: If you need to, make any changes to the arms or foam inserts that will make the chair more stable and effective.
Please refer to the Caramote cne1 Cup Spinner Machine User Manual for more detailed instructions and illustrations.
Add New Comment