User Manual Q&AAnswer
Dec 21, 2024 - 01:55 AM
To replace the batteries in the Aurora 20808 Interactive Learning Stuffed Animal, please follow these steps:
1. Locate the battery compartment on the stuffed animal. It is usually located on the back or underside of the toy.
2. Use a small screwdriver or coin to open the battery compartment. Insert the tool into the slot or turn the compartment cover counterclockwise to open it.
3. Remove the old batteries from the compartment. Take note of their orientation, as you will need to insert the new batteries in the same way.
4. Obtain two LR44 batteries, which are the required battery type for the Aurora 20808. Make sure the batteries are new and in good condition.
5. Insert the new batteries into the compartment, following the correct polarity (+/-) indicated inside the compartment. Ensure that the batteries are securely in place.
6. Close the battery compartment by aligning the cover with the compartment and turning it clockwise or pressing it firmly until it clicks into place.
7. Test the toy to ensure that the new batteries are working properly. Press the designated buttons or areas to activate the sounds and confirm that they are clear and audible.
By following these steps, you should be able to replace the batteries in your Aurora 20808 Interactive Learning Stuffed Animal and restore the sound functionality. If you encounter any difficulties or if the issue persists, please refer to the user manual or contact Aurora customer service for further assistance.
Add New Comment