User Manual Q&AAnswer
Dec 21, 2024 - 01:29 AM
To set the falling time on the National Geographic NGTUMBLER2 Rock Tumbler, please follow these step-by-step instructions:
1. Read the full instructions and learning guide provided with the rock tumbler to familiarize yourself with the tumbling process.
2. Once you have loaded the barrel with up to one pound of rough rocks and added the appropriate amount of polishing grit for the first stage, make sure the barrel is properly sealed and connected firmly to prevent leaks during operation.
3. Plug the tumbler into a normal wall outlet to supply power.
4. Consult the directions provided to determine the recommended falling time for the specific stage of tumbling you are on. The falling time may vary depending on the grit stage.
5. Follow the directions to set the falling time on the tumbler. This may involve adjusting a timer or selecting a specific setting on the tumbler, depending on the model.
6. Once the falling time is set, turn on the tumbler and leave it to run for the specified duration. Check on it periodically to ensure it is working properly.
7. After the specified falling time has elapsed, carefully remove the barrel and inspect the progress of the rocks. Follow the instructions for each stage of tumbling, including cleaning the rocks and barrel, and adding the appropriate amount of grit for the next stage.
8. Repeat the process for each stage of tumbling until the desired level of polish is achieved.
Note: It is important to refer to the specific instructions provided with your National Geographic NGTUMBLER2 Rock Tumbler for accurate and detailed information on setting the falling time for each stage.
Add New Comment