User Manual Q&AAnswer
Dec 21, 2024 - 01:25 AM
To insert the glue sticks into the Surebonder CL-800F Cordless Hot Glue Gun, follow these steps:
1. Plug the glue gun into a 120V electrical outlet.
2. Locate the back of the glue gun, where the feeder tube is located.
3. Take a 0.43" diameter mini glue stick and insert it into the back of the glue gun, pushing it into the feeder tube.
4. Allow the glue gun to heat up for approximately 5 minutes.
5. Once the glue gun is heated, squeeze the trigger to dispense glue. Squeezing the trigger again will dispense more glue.
6. If you need to add additional glue sticks, simply continue the glue flow by adding more sticks.
7. It is important to note that you should not pull the glue sticks from the glue gun. If you need to change the glue, feed the remainder of the glue stick through the glue gun.
8. After use, unplug the glue gun and allow it to cool before storing.
Please refer to the Surebonder CL-800F Cordless Hot Glue Operating Instructions for more detailed information and safety precautions.
Add New Comment