User Manual Q&AAnswer
Dec 21, 2024 - 01:16 AM
To change the image cartridges on the Munchkin 21190 Sound Asleep Nursery Projector, follow these steps:
1. Turn off the projector by pressing the PROJECTOR button once.
2. Select the cartridge you wish to play.
3. Rotate the projector to access the cartridge loading slot.
4. Slide the Locking Slider down to load the cartridge.
5. Make sure the cartridge is inserted right side up with the arrow on the cartridge facing away from the Locking Slider. Note: Loading the cartridge incorrectly may cause it to get permanently stuck.
6. Once the cartridge is loaded, push the Locking Slider up in a locked position to ensure the cartridge will play.
7. Turn on the projector by pressing the PROJECTOR button.
8. Rotate the angle of the projector to project onto the wall or ceiling.
9. When finished, turn off the projector by pressing the PROJECTOR button.
10. You can conveniently store extra cartridges in the compartment on the back of the unit.
Please refer to the Munchkin 21190 Sound Asleep Nursery Projector Owner's Guide for more detailed instructions and illustrations.
Add New Comment