User Manual Q&AAnswer
Dec 21, 2024 - 12:46 AM
To adjust the sensitivity settings on the Hanmatek AC1 Non-Contact Voltage Tester, follow these steps:
1. Power on the voltage tester by pressing the power button, typically located on the body of the device.
2. Once the device is powered on, press and hold the up and down buttons simultaneously. These buttons are used to change the sensitivity levels.
3. While holding the up and down buttons, the sensitivity level will start to change. The LED indicator or display will show the current sensitivity level.
4. Continue to hold the buttons until you reach the desired sensitivity level for your specific voltage testing needs.
5. Release the buttons to set the selected sensitivity level. The voltage tester will now operate at the chosen sensitivity setting.
It is important to note that the sensitivity levels can be adjusted to match the voltage being tested and the environment in which the testing is taking place. Higher sensitivity levels may be required for detecting lower voltages or in noisy electrical environments, while lower sensitivity levels may be suitable for higher voltage detection or in quieter settings.
Refer to the operating instructions provided with the Hanmatek AC1 Non-Contact Voltage Tester for more detailed information on adjusting sensitivity settings and using the device effectively.
Add New Comment