User Manual Q&AAnswer
Dec 21, 2024 - 12:15 AM
To set the alarm on the REACHER R7 Sunrise Alarm Clock, please follow these steps:
1. Plug in the alarm clock using the provided USB-C cable.
2. On the back of the clock, locate the buttons for setting the alarm. These buttons are labeled and easy to identify.
3. Use the touch controls on the clock to select the desired time for your alarm. You can adjust the hour and minute settings separately.
4. Once you have set the alarm time, you can choose the sound and light settings for your wake-up experience.
5. To select the sound, use the touch controls to cycle through the available options. The clock offers 6 natural sounds, such as birds, waves, and rain, as well as an FM radio option. Choose the sound that you find most soothing or enjoyable.
6. Next, adjust the light settings. The clock simulates a sunrise by gradually increasing the light from 10% to 100% brightness over a customizable duration. Use the touch controls to set the duration of the sunrise, typically between 10 to 60 minutes.
7. Once you have set the alarm time, sound, and light settings, the clock is ready to wake you up at the designated time. Make sure to place the clock in a location where the light can reach your eyes comfortably.
Note: The REACHER R7 Sunrise Alarm Clock also offers a snooze function. If you wish to snooze the alarm, simply press the dedicated snooze button located on the clock. This will give you an additional 9 minutes of rest before the alarm sounds again.
For more detailed instructions and information, please refer to the user manual included in the package.
Add New Comment