User Manual Q&AAnswer
Dec 20, 2024 - 11:50 PM
To set a user-defined password for the digital lock on the TENAMIC EP25 Electronic Digital Security Box, please follow the steps below:
1. Make sure you have the manual that came with the security box for reference.
2. Open the security box using the provided key or default password.
3. Locate the control panel on the inside of the door. It should have a numeric keypad.
4. Press the "Program" button on the control panel. This will activate the password setting mode.
5. Enter the default password (usually provided in the manual) followed by the "#" key.
6. The control panel will prompt you to enter a new password. Choose a memorable combination of numbers and press the "#" key after each digit.
7. After entering the new password, press the "#" key again to confirm it.
8. The control panel will display a message indicating that the password has been successfully set.
9. Test the new password by locking and unlocking the security box using the keypad.
Note: It is important to choose a strong and unique password that is not easily guessable. Avoid using common combinations like "1234" or sequential numbers. Additionally, make sure to keep your password confidential and avoid sharing it with unauthorized individuals.
For more detailed instructions or troubleshooting tips, please refer to the user manual provided with the TENAMIC EP25 Electronic Digital Security Box.
Add New Comment