User Manual Q&AAnswer
Dec 20, 2024 - 11:40 PM
To change the impact force on the Seesii WH710 Cordless Impact Wrench, follow these steps:
1. Start the tool by pulling the switch trigger.
2. Press the button on the control panel to change the impact force.
3. Each press of the button will cycle through the available impact force settings: High, Medium, and Low.
4. You can change the impact force within approximately one minute after releasing the switch trigger.
5. The impact force grade can be checked by pulling the switch trigger to the extent that the tool does not operate. The corresponding lamp on the switch panel will indicate the selected impact force grade.
Note: If none of the lamps on the panel are lit, pull the switch trigger once before pressing the button. All lamps on the switch panel go out when the tool is turned off to save battery power.
Please refer to the Seesii WH710 Cordless Impact Wrench Instruction Manual for more detailed instructions and illustrations.
Add New Comment