User Manual Q&AAnswer
Dec 20, 2024 - 11:19 PM
To control the MEVA meva-pp Walking and Barking Puppy using the remote control leash, please follow these steps:
1. Ensure that the puppy is turned on and the batteries are properly inserted.
2. Hold the remote control leash handle in your hand, making sure it is within range of the puppy.
3. Press the button on the leash to trigger the puppy's walking action. The puppy will start walking forward, mimicking the movements of a real dog.
4. To make the puppy bark, press the button on the leash again. The puppy will emit barking sounds, adding to the interactive play experience.
5. You can use the remote control leash to guide the puppy's movements. Point the leash in the direction you want the puppy to go, and it will walk in that direction.
6. Practice controlling the puppy's movements by using the remote control leash. The more you use it, the better you will become at maneuvering the puppy around.
Please note that it is important to ensure there are no obstructions between the remote control and the puppy to maintain proper communication. Additionally, always supervise younger children while they play with the puppy to ensure their safety.
For more detailed instructions and troubleshooting tips, please refer to the "Setup Guide" section of the MEVA meva-pp Walking and Barking Puppy User Manual.
Add New Comment