User Manual Q&AAnswer
Dec 20, 2024 - 10:16 PM
Adjusting the brightness settings on the Marvin's Magic MMG 009/B Light Up Tracing Pad is easy. Here's a step-by-step guide:
1. Turn on the tracing pad by pressing the power button located on the side or bottom of the pad.
2. Once the pad is turned on, you will notice that the LED-lit surface is already illuminated.
3. To adjust the brightness level, look for the brightness control buttons on the side or bottom of the pad. These buttons are usually labeled with "+" and "-" symbols.
4. Press the "+" button to increase the brightness if you find the current level too dim.
5. Press the "-" button to decrease the brightness if you find the current level too bright.
6. Continue pressing the "+" or "-" button until you reach your desired brightness level.
7. The tracing pad usually offers multiple brightness levels, so you can find the one that suits your needs and the ambient lighting conditions.
8. Once you have adjusted the brightness level, you can start tracing or sketching on the illuminated surface.
Note: If you are unable to locate the brightness control buttons or if the brightness settings are not adjustable on your specific model, please refer to the user manual that came with your Marvin's Magic MMG 009/B Light Up Tracing Pad for more detailed instructions.
For any further assistance or troubleshooting, you can contact Marvin's Magic customer service through their official website or email support@marvinsmagic.com.
Add New Comment