How do I install the Chrome Battery 12-BS iGel Maintenance Free Replacement Battery? (‎Chrome Battery ‎12-BS iGel Replacement Battery Owner's Manual)

Answer

manuals.plus

Dec 20, 2024 - 10:01 PM

Installing the Chrome Battery 12-BS iGel Maintenance Free Replacement Battery is a straightforward process. Here are the step-by-step instructions:

1. Ensure safety: Before starting the installation, make sure the vehicle's electrical circuit is turned off to avoid any accidents or damage.

2. Position the battery: Place the battery in an upright position, avoiding any shaking or impact during transit and installation.

3. Disconnect the old battery: If there is an existing battery in your vehicle, disconnect the negative (-) terminal first, followed by the positive (+) terminal. This will ensure a safe and proper removal.

4. Connect the new battery: Connect the positive (+) terminal of the Chrome Battery to the positive (+) terminal of your vehicle. Then, connect the negative (-) terminal of the Chrome Battery to the negative (-) terminal of your vehicle. Ensure the connections are secure and tight.

5. Secure the battery: Once the connections are made, securely fasten the Chrome Battery in the correct position in your vehicle. This will prevent any movement or damage during operation.

6. Test the installation: After the installation is complete, turn on the vehicle's electrical circuit and check if everything is functioning properly. Ensure that the battery is providing power to the necessary components.

Please note that these instructions are a general guide, and it's always recommended to consult the specific owner's manual for your vehicle for any additional instructions or precautions.

For further assistance or clarification, you can refer to the Chrome Battery 12-BS iGel Maintenance Free Replacement Battery owner's manual, which provides detailed information on installation and usage.