User Manual Q&AAnswer
Dec 20, 2024 - 09:52 PM
To activate the misting function in the Magic Mixies S3 Magic Genie Lamp, please follow these steps:
1. Ensure that the water tank is filled: Check if the water tank inside the lamp is filled with water. If it is empty, carefully follow the directions provided in the user guide to fill the water tank.
2. Turn on the lamp: Locate the switch in the battery box and make sure it is turned on. This will power up the lamp and enable the misting function.
3. Rub the lamp three times: To initiate the misting effect, rub the lamp three times. This action will trigger the mist to come out of the spout, creating a magical atmosphere as the Genie Mixie is revealed.
If you have followed these steps and the misting function still does not work, please check the following:
- Ensure that the water tank is not blocked: Sometimes, debris or blockages can prevent the mist from coming out. Check the water tank and spout for any obstructions and clear them if necessary.
- Refill the water tank if needed: If the misting effect is weak or not visible, it could be due to a low water level in the tank. Refill the water tank according to the instructions provided in the user guide.
If the issue persists, it is recommended to refer to the troubleshooting section of the user guide or contact customer service for further assistance.
Add New Comment