User Manual Q&AAnswer
Dec 20, 2024 - 09:28 PM
To activate the Yuasa YUAM320BS battery, follow these steps:
1. Ensure you have the supplied acid bottle and the battery is ready to be activated.
2. Carefully remove the acid bottle from the packaging.
3. Remove the battery's vent caps, located on top of the battery cells.
4. Slowly pour the acid from the bottle into each cell, filling them to the recommended level. Be cautious not to overfill.
5. After filling each cell, replace the vent caps securely.
6. Allow the battery to sit undisturbed for approximately 30 minutes to allow the acid to be absorbed and distributed evenly.
7. Once the activation time has passed, the battery is ready to be installed and used.
Please refer to the user manual for more detailed instructions and safety precautions during the activation process.
Add New Comment