User Manual Q&AAnswers
Dec 20, 2024 - 08:55 AM
To insert the batteries into the Dorcy 41-1047 Handheld Flashlight, follow these steps:
1. Unscrew the tail cap of the flashlight.
2. Insert the 3 AA batteries (included) into the battery compartment, ensuring the correct polarity (+/-) alignment.
3. xxxx the tail cap back on tightly to secure the batteries in place.
Please refer to the user manual for visual instructions and additional information on battery installation.
Dec 20, 2024 - 08:57 AM
To change the brightness levels on the ThruNite Archer 2A-V3 LED Flashlight, follow these steps:
1. Make sure the flashlight is turned on by pressing the tail switch halfway for momentary on or fully for constant on/off.
2. With the light on, press the side switch to cycle through the different brightness modes. The flashlight offers four distinct brightness levels—Firefly, Low, Medium, and High.
3. Keep pressing the side switch to cycle through the brightness levels until you find the desired level of brightness.
4. If you want to activate the strobe mode, quickly double-click the side switch.
Note: The ThruNite Archer 2A-V3 LED Flashlight also has a Turbo mode, which provides the highest level of brightness. To activate Turbo mode, fully press and hold the side switch for about 1 second.
Add New Comment