User Manual Q&AAnswer
Dec 20, 2024 - 08:52 AM
To mount the Streamlight 88066 weapon light on your firearm, follow these steps:
1. Ensure the firearm is unloaded and the breech is open.
2. For a MIL Standard 1913 rail or M-LOK rail, rotate the thumb wheel on the rail clamp until it is fully open.
3. Slip the clamp over the rail of the weapon.
4. Retighten the thumb wheel securely to secure the clamp.
5. If using the M-LOK mount, remove the two mounting screws using a 2mm hex wrench and loosen the thumb wheel fully.
6. Align the M-LOK mount holes with the ProTac Rail Mount HL-X holes.
7. Use a 3/32" hex wrench to tighten the 8-32x1/4" screws.
8. To connect the ProTac T-nuts to the rail, rotate the M-LOK Rail Mount HL-X and M-LOK uninstall position.
9. Position this assembly in the desired rail location.
10. Tighten the 10-24x3/8" screws using the 1/8" hex wrench to lock the T-nut.
Please refer to the Streamlight 88066 operating instructions manual for visual references and additional information on mounting the weapon light.
Add New Comment