User Manual Q&AAnswer
Dec 20, 2024 - 05:46 AM
To set the time on the Znewtech ZNT-ZT-X1W Hexagon Rotating Timer, follow these steps:
1. Press the MODE button once to enter the setting for the 12/24-hour mode.
2. Use the UP/DOWN buttons to select either the 12-hour or 24-hour format.
3. Press the SET button to enter the setting for the clock hour.
4. Use the UP/DOWN buttons to adjust the hour.
5. Press the SET button again to enter the setting for the clock minute.
6. Use the UP/DOWN buttons to adjust the minute.
7. Press the MODE button twice to finish setting the clock.
Note: If you do not press any button for about 10 seconds while setting the clock, the clock setting mode will be canceled.
For more detailed instructions and visual references, please refer to the "Setting Clock" section in the Znewtech ZNT-ZT-X1W Hexagon Rotating Timer User Manual.
Add New Comment