User Manual Q&AAnswer
Dec 20, 2024 - 05:36 AM
To start the SIMPSON MS61222-S Pressure Washer, follow these steps:
1. Ensure the fuel valve is open: Locate the fuel valve on the engine and turn it to the "ON" position.
2. Turn the engine switch to "ON": Locate the engine switch on the control panel and turn it to the "ON" position.
3. Set the choke lever: Locate the choke lever on the engine and set it to the "CHOKE" position if the engine is cold. If the engine is warm, set the choke lever to the "RUN" position.
4. Pull the starter grip: Grasp the starter grip firmly and pull it slowly until you feel resistance, then pull it quickly to start the engine. Repeat this process if necessary.
For more detailed instructions and safety precautions, please refer to the SIMPSON MS61222-S Pressure Washer User Manual provided above.
Add New Comment