User Manual Q&AAnswer
Dec 20, 2024 - 04:00 AM
Calibrating the TickTockTools AZC-TON-88 Digital Angle Finder is a simple process that can help ensure accurate angle measurements. Here are the steps to calibrate the device:
1. Find a known flat surface: Locate a surface that you know is perfectly flat, such as a level countertop or table.
2. Place the angle finder on the flat surface: Position the angle finder on the flat surface, making sure it is stable and not tilted or wobbling.
3. Press the zero button: While the angle finder is on the flat surface, press the zero button. This will reset the gauge to zero and calibrate it to the flat surface.
4. Check for accurate readings: After calibrating, test the angle finder by measuring angles on different surfaces or objects. Compare the readings to known angles or measurements to ensure accuracy.
It is recommended to periodically check the calibration of the angle finder, especially if you suspect any inaccuracies. This can be done by repeating the calibration process on a known flat surface or using calibration tools if available.
Please refer to the TickTockTools AZC-TON-88 Digital Angle Finder user manual for more detailed instructions and information on calibration.
Add New Comment