User Manual Q&AAnswer
Dec 20, 2024 - 03:48 AM
To calibrate the S&F STEAD & FAST PLT-HKQ-001 Digital Angle Finder, follow these steps:
1. Place the angle finder on a known flat surface, such as a tabletop or workbench.
2. Press and hold the zero button until the display shows "CAL" or "0.0".
3. Release the zero button and wait for the angle finder to calibrate itself. This may take a few seconds.
4. Once the calibration is complete, the angle finder will display "0.0" or the angle measurement if it is not perfectly level.
It is important to calibrate the angle finder on a flat surface to ensure accurate readings. If you notice any discrepancies in the measurements after calibration, you may need to recalibrate the device or contact the manufacturer for further assistance.
Add New Comment