User Manual Q&AAnswer
Dec 20, 2024 - 03:46 AM
Calibrating the R&D PT180 Digital Angle Finder is a simple process. Here are the step-by-step instructions:
1. Ensure that the angle finder is turned off before starting the calibration process.
2. Find a perfectly flat surface, such as a table or countertop, to use as a reference for calibration.
3. Place the angle finder on the flat surface, making sure it is stable and not tilted in any direction.
4. Press and hold the power button for a few seconds to turn on the angle finder.
5. Once the angle finder is turned on, press the zero button to set the current angle as the reference point.
6. The angle finder should now display a reading of 0.00 degrees. This indicates that it has been successfully calibrated on the flat surface.
7. You can now use the angle finder to measure angles accurately.
It's important to note that calibration should be done periodically to ensure accurate measurements. If you notice any discrepancies or inaccuracies in the readings, you may need to recalibrate the angle finder.
For more detailed instructions and information, please refer to the user manual provided with the R&D PT180 Digital Angle Finder.
Add New Comment