User Manual Q&AAnswer
Dec 20, 2024 - 01:44 AM
To clean the nozzles of the AirTec Type-3 Ultra Electric Air Duster Blower, follow these steps:
1. Ensure that the air duster is unplugged and turned off before proceeding.
2. Remove the nozzle attachment from the air duster by gently pulling it away from the device.
3. Inspect the nozzle for any visible dust or debris. If you see any blockage, use a small brush or compressed air to remove the particles. Be careful not to damage the nozzle during this process.
4. If the nozzle is still not clean, you can rinse it with water. However, make sure to dry it thoroughly before reattaching it to the air duster.
5. Once the nozzle is clean and dry, securely attach it back to the air duster by aligning the grooves on the nozzle with the corresponding slots on the device. Push the nozzle in until it clicks into place.
6. After cleaning the nozzle, you can test the airflow by turning on the air duster and directing the airflow at a surface. If the airflow is restored, you have successfully cleaned the nozzle.
Regularly cleaning the nozzles of your AirTec Type-3 Ultra Electric Air Duster Blower will help maintain optimal airflow and ensure efficient dust removal.
Add New Comment