User Manual Q&AAnswer
Dec 20, 2024 - 01:40 AM
To test the battery level of different types of batteries using the Tenergy 1444 Digital Battery Checker, please follow these steps:
1. Open the device's box and take out the Tenergy 1444 Digital Battery Checker.
2. If required, insert the correct batteries into the battery checker according to the instructions in the user guide.
3. Familiarize yourself with the buttons on the device, including the LCD screen, start button, and testing connections.
4. Press the power button to turn on the battery checker.
5. Select the appropriate battery type by pressing the "Battery Type" button. Choose from NiCd/NiMH, Li-Po, LiFe, or Li-Ion.
6. For AA, AAA, C, D, and button cell batteries, insert the battery into the corresponding port on the battery checker, ensuring the correct polarity.
7. Press the test button to start checking the battery.
8. The LCD screen will display the battery level and voltage reading.
9. Interpret the results using the "good," "low," and "replacement needed" signs shown on the screen.
10. Carefully remove the tested battery from the battery checker.
11. Repeat the process for each battery you want to test.
12. After use, turn off the battery checker to save battery life.
13. Store the battery checker in a cool and dry place when not in use.
Please refer to the Tenergy 1444 Digital Battery Checker Operating Instructions for more detailed information and illustrations.
Add New Comment