User Manual Q&AAnswer
Dec 20, 2024 - 01:35 AM
To properly use the STEREN PCAJA-001 Electric Shock Machine, please follow these steps:
1. Insert 4 "AA" batteries into the compartment located at the bottom of the box, ensuring correct polarity.
2. Make sure the potentiometer ( xxxx ) is set at level 0.
3. Turn on the equipment using the switch. An LED will illuminate, indicating that the equipment is in operation.
4. The person receiving the voltage should firmly hold one electrode in each hand.
5. Gradually increase the power level, but avoid sudden increases.
6. If instructed to do so by the person holding the electrodes, stop increasing the power or turn off the equipment.
7. When finished using the equipment, set the potentiometer level back to 0 and turn it off.
Please note that this product should not be used by pregnant individuals or those with pacemakers. It is also important to avoid using it on wet surfaces. The use of this equipment is the sole responsibility of the user.
For more detailed instructions and safety information, please refer to the STEREN PCAJA-001 Electric Shock Machine User Manual.
Add New Comment