User Manual Q&AAnswer
Dec 20, 2024 - 01:06 AM
Cleaning the washable HEPA filter of the COLORCORAL Rechargeable Vacuum Dust Cleaner is important for maintaining optimal performance. Here are the step-by-step instructions:
1. Turn off the vacuum cleaner and ensure it is not connected to any power source.
2. Twist off the dustbin to remove it from the vacuum cleaner.
3. Locate the washable HEPA filter inside the dustbin.
4. Gently tap the filter to remove any loose debris or dust.
5. Rinse the filter under running water. Use mild soap if necessary to remove stubborn dirt.
6. Thoroughly rinse the filter until the water runs clear.
7. Shake off any excess water and allow the filter to air dry completely. It is important to ensure the filter is completely dry before reassembling the vacuum cleaner.
8. Once the filter is dry, carefully reinstall it back into the dustbin.
9. Twist the dustbin back onto the vacuum cleaner until it is securely attached.
10. Your washable HEPA filter is now clean and ready for use.
Remember to clean the filter regularly, ideally every 3-6 months depending on usage frequency, to maintain optimal suction power and performance.
Add New Comment