User Manual Q&AAnswer
Dec 19, 2024 - 11:02 AM
To clean the nozzle of the ATEngeus TAD03 Rechargeable Compressed Air Duster, please follow these steps:
1. Power off the duster: Press the power button to turn off the duster and ensure it is disconnected from any power source.
2. Remove the nozzle: Gently pull the nozzle straight out from the front of the duster. The nozzle should detach easily.
3. Clean the nozzle: Use a soft brush or compressed air to remove any dust or debris that may be clogging the nozzle. Be careful not to damage the nozzle during the cleaning process.
4. Reattach the nozzle: Once the nozzle is clean, align the nozzle with the nozzle slot on the front of the duster and push it in until it clicks into place.
5. Test the airflow: Power on the duster and test the airflow to see if it has improved. If the airflow is still weak, repeat the cleaning process or contact ATEngeus customer service for further assistance.
It is important to regularly clean the nozzle to maintain optimal performance of the ATEngeus TAD03 Rechargeable Compressed Air Duster. By keeping the nozzle clean, you can ensure that the airflow remains strong and effective in removing dust and debris from various surfaces.
Add New Comment