User Manual Q&AAnswer
Dec 19, 2024 - 10:51 AM
Adjusting the fit of the FUNWICT HT-23 Rechargeable Rear Light Cycling Helmet is easy. Here's a step-by-step guide:
1. Start by loosening the chin straps and opening the dial-fit system at the back of the helmet.
2. Place the helmet on your head and position it so that it sits level and covers the forehead without obstructing your vision.
3. Adjust the chin straps by pulling them snugly under your chin. Make sure they are not too tight or too loose.
4. Use the dial-fit system at the back of the helmet to fine-tune the fit. Turn the dial clockwise to tighten the helmet and counter-clockwise to loosen it. The helmet should fit snugly without any discomfort or pressure points.
5. Once you have achieved a comfortable and secure fit, close the dial-fit system to lock it in place.
6. Double-check the fit by shaking your head gently. The helmet should stay in place without wobbling or sliding.
7. Finally, adjust the length of the chin straps if necessary. Trim any excess strap length and secure the straps using the provided strap dividers.
Remember to regularly check and readjust the fit of your helmet as needed, especially if you change hairstyles or wear different headgear underneath. A properly fitted helmet is essential for optimal safety and protection while cycling.
Add New Comment