User Manual Q&AAnswer
Dec 19, 2024 - 10:40 AM
To replace the batteries in the Apace Vision UI-BRL-44 LED Safety Light, please follow these step-by-step instructions:
1. Start by locating the mini-screwdriver that is included in the package. This screwdriver is specifically designed for removing the battery compartment cover.
2. Once you have the mini-screwdriver, look for the battery compartment on the back of the safety light. It should be a small, rectangular compartment with a xxxx holding the cover in place.
3. Use the mini-screwdriver to carefully unscrew the xxxx and remove the battery compartment cover. Set the xxxx aside in a safe place, as you will need it later.
4. Inside the battery compartment, you will see the old batteries. Take note of their orientation, as you will need to insert the new batteries in the same way.
5. Remove the old batteries from the compartment and dispose of them properly.
6. Take the new batteries (CR2032) and insert them into the compartment, making sure to align them correctly according to the markings or polarity indicators.
7. Once the new batteries are in place, carefully put the battery compartment cover back on and use the mini-screwdriver to secure it by tightening the xxxx .
8. Ensure that the cover is securely in place and the xxxx is tightened properly to prevent any water or dust from entering the battery compartment.
9. Your Apace Vision UI-BRL-44 LED Safety Light is now ready to be used with the new batteries.
If you have any further questions or encounter any difficulties during the battery replacement process, please refer to the user manual provided with the product or contact Apace Vision customer care for assistance.
Add New Comment