User Manual Q&AAnswer
Dec 19, 2024 - 10:32 AM
Mounting the NiteRider 5084 Solas 100-Lumens USB Rechargeable Bike Tail Light is a simple process. Here are the step-by-step instructions:
1. Start by locating the seat post on your bike. This is the vertical tube that connects the saddle to the frame.
2. Take the included seat post strap mount and position it around the seat post. Make sure the strap is securely wrapped around the post.
3. Insert the tail light into the mount, aligning the slots on the light with the tabs on the mount.
4. Push the tail light firmly into the mount until it clicks into place. Ensure that it is securely attached and does not move or wobble.
5. Once the tail light is mounted, adjust the angle of the light to optimize visibility. The mount allows for angle adjustment, so you can fine-tune the light output direction.
6. Tighten the strap on the mount to ensure a secure fit. Make sure it is tight enough to prevent the light from moving during rides, but not so tight that it damages the seat post.
7. Test the mounting by gently shaking the bike to ensure the tail light remains securely attached.
That's it! Your NiteRider 5084 Solas 100-Lumens USB Rechargeable Bike Tail Light is now properly mounted and ready to use. Enjoy your rides with enhanced visibility and safety.
Add New Comment