User Manual Q&AAnswer
Dec 19, 2024 - 06:53 AM
To charge your controllers using the NinABXY Q163 Controller Charger Station, please follow these steps:
1. Take everything out of the box, including the charger station, portable batteries, and battery covers.
2. Plug in the USB Type-C cord to a power source. It is suggested to use a power source with an output of 5V/1A.
3. On the charging dock, locate the holes that are marked for the portable battery packs.
4. Insert the portable battery packs into the corresponding holes on the charging dock.
5. Check the 'X'-shaped LED indicators on the charger station. A green light indicates that the battery is ready to use or fully charged, while a red light indicates that it is currently charging.
6. Place your Xbox controllers on the dock, ensuring they fit tightly.
7. Each battery pack will take approximately 4 to 5 hours to fully charge.
8. If you have two controllers, you can use both charging ports to charge them simultaneously.
9. To use the charging dock, turn on the power switch.
10. It is recommended to charge your controllers when they are not in use to ensure they are ready for long gaming sessions.
11. Make sure that the battery covers provided with the charger station fit the type of your Xbox controller.
12. Keep the charger station and controllers in a cool and dry place when not in use.
Please refer to the "Setup Guide" section of the user manual for more detailed instructions and precautions.
Add New Comment