User Manual Q&AAnswer
Dec 19, 2024 - 06:45 AM
To charge the Lepro 3200008 Rechargeable LED Headlamp, follow these steps:
1. Locate the charging port on the headlamp. It is usually located on the back or side of the headlamp.
2. Connect the provided USB cable to the charging port of the headlamp.
3. Plug the other end of the USB cable into a power source, such as a computer USB port or a USB wall adapter.
4. The charging indicator on the headlamp will turn on, indicating that the charging process has started.
5. Allow the headlamp to charge fully. It takes approximately 4 hours to fully charge the headlamp.
6. Once the headlamp is fully charged, the charging indicator will turn off or change color to indicate a full charge.
7. Disconnect the USB cable from the headlamp and the power source.
Your Lepro 3200008 Rechargeable LED Headlamp is now ready to use. Remember to avoid overcharging or over-discharging the battery to prolong its lifespan. If you encounter any issues with the headlamp not turning on or charging properly, please refer to the troubleshooting section in the user manual or contact customer service for assistance.
Add New Comment