User Manual Q&AAnswer
Dec 19, 2024 - 05:39 AM
To install the KASLIGHT H6054 LED Headlights, follow these steps:
1. Ensure that your vehicle requires 7x6 inch (5x7 inch) headlights and that the KASLIGHT H6054 LED Headlights are compatible with your vehicle's make and model.
2. Start by disconnecting the negative battery terminal to prevent any electrical accidents.
3. Locate the existing headlights on your vehicle and remove any screws or clips holding them in place.
4. Disconnect the wiring harness from the old headlights and remove them from the headlight housing.
5. Take the KASLIGHT H6054 LED Headlights and connect the wiring harness to the corresponding socket on the back of the headlights.
6. Align the headlights with the headlight housing and secure them in place using the provided screws or clips.
7. Reconnect the negative battery terminal to restore power.
8. Test the headlights to ensure they are functioning properly on both high and low beam settings.
Please note that while installation is generally straightforward and can be completed with basic hand tools, some vehicles may require slight modifications to the headlight barrels due to space constraints. It is always recommended to refer to the vehicle-specific instructions or consult a professional if you are unsure about the installation process.
Add New Comment