User Manual Q&AAnswer
Dec 19, 2024 - 05:28 AM
The installation process for the Lowrance TripleShot Skimmer Transducer is quite straightforward. Here are the steps to install it:
1. Start by locating a suitable mounting location on the transom of your boat. The transducer should be installed below the waterline and away from any obstructions.
2. Use the included mounting bracket to attach the transducer to the transom. Ensure that it is securely fastened and aligned properly.
3. Connect the transducer cable to the back of your Lowrance Hook Reveal fish finder unit. The cable should be routed in a way that avoids any sharp bends or potential damage.
4. Connect the power cable to a power source on your boat. This can be done by plugging it into the appropriate power outlet or by connecting it directly to the boat's battery.
5. Once the transducer and power cables are connected, you can turn on your Lowrance Hook Reveal fish finder and follow the on-screen instructions to complete the setup process.
For more detailed instructions and illustrations, please refer to the user manual that comes with the Lowrance TripleShot Skimmer Transducer.
Add New Comment