User Manual Q&AAnswer
Dec 19, 2024 - 05:08 AM
To change the charging current on the FUGASUN LCD Battery Charger, follow these steps:
1. Make sure the charger is connected to a power source and the batteries are inserted correctly.
2. Press button A on the charger to cycle through the available charging current options.
3. The LCD screen will display the current settings and battery life for each channel (C1 and C2).
4. Keep pressing button A until you reach the desired charging current: 0.5A, 1A, or 2A.
5. The charging current you select should be based on the type and size of the battery you are charging.
6. Once you have selected the desired charging current, the charger will start charging the batteries at the chosen rate.
7. Monitor the LCD screen to see real-time information on the charging state, such as voltage, current, and charge finish.
8. When the charging is complete, the LCD screen will display full progress signs. Remove the batteries promptly to prevent overcharging.
By adjusting the charging current, you can effectively manage charge times and ensure that each battery is charged optimally based on its volume and charge needs.
Add New Comment