User Manual Q&AAnswer
Dec 19, 2024 - 04:49 AM
Installing the YakAttack Fish Finder Mount with Track Mounted LockNLoad Mounting System is a simple process. Here are the steps:
1. Use the included 10/32 screws and nuts provided with the mount.
2. Use a ¼ Allan key to tighten the screws.
3. If you are installing a Lowrance Elite 7, use the four inner pre-drilled holes on the mount.
4. On the underside of the rectangular fish finder mount, you will find designated nut pockets.
5. Align the Lowrance Gimbal with the nut pockets.
6. Place the nuts into the designated nut pockets.
7. Insert the screws and tighten them using the Allan key.
8. Slide in the fish finder and tighten the knobs on both sides to ensure a firm hold.
Please refer to the instruction manual for further details and illustrations on the installation process.
Add New Comment