User Manual Q&AAnswer
Dec 19, 2024 - 03:38 AM
To program the Umiconty Replacement Remote with your TV remote functions, you will need the original infrared remote control of your TV. Here are the step-by-step instructions:
1. Make sure the Umiconty Replacement Remote has batteries inserted.
2. Point the original TV remote control towards the Umiconty Replacement Remote.
3. Press and hold the button on the Umiconty Replacement Remote that you want to program (e.g., volume up).
4. While holding the button, aim the original TV remote control towards the Umiconty Replacement Remote and press the corresponding button on the original remote (e.g., volume up).
5. Release both buttons. The Umiconty Replacement Remote should now be programmed with the TV remote function you selected.
6. Repeat steps 3-5 for each button you want to program on the Umiconty Replacement Remote.
Please note that the specific steps may vary depending on your TV model and the original remote control. It is recommended to refer to the user manual of your TV for more detailed instructions on programming a universal remote.
Add New Comment